Roller Core Veneer Dryer-manufacture,factory,supplier from China

The demand for wood veneer dryer is increasing year by year,and it has been recognized and purchased by consumers.Traditional natural air-dried wood is prone to problems such as deformation and cracking.The use of wood dryer equipment can effectively solve this problem.The cost of dryer equipment is high, so basic maintenance needs to be done in the later use process,such as the ground,ventilation system, gate,instrument,heating system and debugging system,etc.The specific operations are as follows:1.The floor of the wood dryer equipment should be kept clean and tidy,and the debris should be c

Core veneer dryer principle is the core veneer in the upper and lower two pieces of coiler under the clamping preheating drying, coiler through the steam or heat conduction oil heating to transfer the temperature to the core veneer, high temperature coiler and wet core veneer direct contact, high thermal efficiency, heat loss is small, the core veneer is heated uniformly, the wood shrinkage of the benign physical process of evaporation, so the core veneer after drying the moisture content of the uniformity of the wood, the wood colour and lustre, inside and outside of the same, will not produc

Recently, a brand new veneer dryer from our company is being sent to the customer's factory. After many inspections, the customer finally chose us. We specially customize the production according to the customer's veneer size to ensure that the output of the veneer dryer meets the customer's production needs. It can be used to dry various wood species.

The roller veneer dryer purchased by the Russian customer has been delivered, together with our biomass burner. Biomass burner is our patented product, which can directly burn waste wood and save cost.

The 2deck veneer roller dryer order is expected to be ready on June 5th, 2023. We will load containers on the date approved by the customer in Zimbabwe.    

We are pleased to announce that Shine has successfully reached an important agreement with our European customer, who has ordered a new high-capacity roller veneer dryer. This roller dryer is equipped with a fully automatic board loading and unloading system, which is customized for the customer's needs. It not only improves production efficiency, but also reduces labor costs and ensures uniform drying of veneer.

Great news that shine veneer roller dryer heated with thermal fluid finished installation and is ready for the commissioning. 2 Deck veneer roller dryer with working width 3750mm, 11 sections(4meters one section). Veneer drying capacity 80m3 per day. You are welcome to contact us for the site visiting.      

The 2nd set veneer roller dryer ordered by the customer in Yunnan started the test running. The veneer dryer is heated with thermal oil. The wood specie is birch. Drying capacity is 70-80 CBM per day.  

Over the last 3 days, we finished loading the roller dryer parts to the 4 containers. The roller veneer dryer is customized according to the customer's special requirement. The working width and number of the heat exchangers are customized for the customers in the very cold area. 

The shipment of veneer roller dryer were loaded into six trucks at our factory. Main components are: Four layers roller dryer, biomass burner, automatic veneer feeder and veneer collection system.