Wood Coating Thickness Gauge For Measurement Thickness-manufacture,factory,supplier from China

The demand for wood veneer dryer is increasing year by year,and it has been recognized and purchased by consumers.Traditional natural air-dried wood is prone to problems such as deformation and cracking.The use of wood dryer equipment can effectively solve this problem.The cost of dryer equipment is high, so basic maintenance needs to be done in the later use process,such as the ground,ventilation system, gate,instrument,heating system and debugging system,etc.The specific operations are as follows:1.The floor of the wood dryer equipment should be kept clean and tidy,and the debris should be c

Indonesia customers buy 40 m double veneer dryer is now the installation is complete, is in debugging, because of the outbreak reason we can't send people to guide the installation, the customer installed successfully in our video and chat to communicate guidance, thank you very much for our customers trust, supporting and our biomass burner, direct combustion can be all kinds of scrap wood, effective to save fuel; It adopts automatic control and frequency conversion control system, can automatically adjust the transmission speed and temperature according to different veneer thickness and

Veneer dryer precautionsDo not put a lot of veneers at once, in the use of veneer dryer for drying work, pay attention to not in order to save trouble at once placed too much veneer. This situation will affect the drying effect of the veneer, causing a certain degree of damage to the equipment.2. Place the veneer to ensure uniformity, in order to ensure that the drying effect of the veneer is good, in the placement of the veneer, it is recommended to place the thickness of uniformity, size of the same size of the veneer, so as to ensure the quality of veneer drying to a large extent.3.

Rotary cutting veneer dryer equipment has the characteristics of fast and monotonous, good uniformity, high energy efficiency ratio, small footprint, no environmental pollution, etc., can be widely used in various wood drying treatment. Equipped with infrared temperature measurement, low noise transmission system, active loading and unloading system. GMP manufacturing standards, microwave leakage is less than 1mw/㎡, strict implementation of relevant safety standards.

Veneer dryer precautions1. Do not put a lot of veneers at once, in the use of veneer dryer for drying work, pay attention to not in order to save trouble at once placed too much veneer. This situation will affect the drying effect of the veneer, causing a certain degree of damage to the equipment.2. Place the veneer to ensure uniformity, in order to ensure that the drying effect of the veneer is good, in the placement of the veneer, it is recommended to place the thickness of uniformity, size of the same size of the veneer, so as to ensure the quality of veneer drying to a large extent.3.

After the on-site drying test, the shrinkage rate of the shine veneer dryer is 2-2.5 cm before and after drying, and the moisture content can be dried to zero, or it can be dried to the moisture you need according to your requirements. It adopts automatic control and frequency conversion control system, which can automatically adjust the transmission speed and temperature according to different veneer thickness and moisture content, so as to achieve the ideal drying effect. Biomass burners can directly burn all kinds of waste wood, saving drying costs.

The production of our 4 deck veneer dryer purchased by our customer in Guizhou has now been completed and will be ready to be sent to the customer.The supporting biomass burner can directly burn all kinds of waste wood.and our veneer dryer adopts automatic electric control and frequency conversion system,which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect.Equipped with automatic veneer feeder and automatic collection system,which not only improves the drying efficiency but also sav

Recently, the 2 deck dryer ordered by our customers has been completed and is ready for delivery. It is equipped with a biomass burner and can directly burn bark. The output can reach 80 cubic meters. It is used to dry rubber wood veneers. Before placing an order, the customer went to another customer's site for a field inspection and was very satisfied with the equipment. After that, he decided to purchase it.

We are pleased to announce that the double-layer veneer dryer recently customized for a Thai customer has been completed and is being prepared for shipment.

In 2023, Vietnam exported wood chips to 13 markets. China, Japan, and South Korea were the country's three major markets for wood chip exports. In 2023, Vietnam exported over 9.38 million tons of wood chips to the Chinese market, with a value exceeding $1.43 billion, accounting for 65.1% of the export volume and 64.7% of the export value.